Pack embouteillage contre pression basic

Contents of the pack:

• - 1x Manual counter-pressure filler
• - 2x Straight BSP adapters (3/8" Tube to 1/4" BSP)
• - 1x Duotight 3/8" Beer Ball Lock connector
• - 1x Duotight 3/8" Gas Ball Lock connector
• - 1x Equal T-connector 3/8"
• - 5m of John Guest 3/8" tubing

Tips and Installation:

Hose barbs are installed by default on the filler. For ease, we recommend removing them and replacing them with the two straight BSP adapters. You can simply plug the John Guest tubing into these, which will be more secure.

The 5 meters of John Guest tubing are delivered as is. We recommend cutting them into several pieces based on your needs.

Plug a piece of John Guest tubing into the regulator of your CO2 cylinder. At the other end of the tubing, plug the T-connector.

Run a tube from one of the T-connector's outlets to the straight adapter (to BSP threading) screwed onto the filler.

The remaining outlet of the T-connector will be used to connect to the gas Ball Lock connector (to plug into your fermenter).

Finally, take another piece of tubing and plug it into the other straight adapter on the filler. At the other end, connect the beer Ball Lock connector, which you will connect to the beer outlet of your fermenter.