Double CIP Cleaning Ball TC 1.5"
- Dedicated advice and support
- After-sales service
- Fast shipping
- Secure payments
Description
Discover the cleaning system used by all major Craft breweries.
With this CIP system (Clean in Place), cleaning your equipment has never been so effective.
Simply install it on one of the 1.5" Tri-Clamp ports of your fermenter, connect the upper Tri-Clamp (1.5") to a 1.5" Tri-Clamp to 19mm hose connector (+ a PVC or EPDM hose) itself connected to a pump.
We recommend using a 65W magnetic pump to be able to use all cleaning products, including the most corrosive ones.
See more
CIP, the most effective cleaning system on the market
As an experienced brewer, you know that cleaning is one of the most important parts of brewing. Unfortunately, it is also the most tedious part…
The rotating CIP cleaning ball is the most effective tool for cleaning the inside of fermenters, tanks, etc. All major breweries are equipped with it. It saves effort and prevents wasting precious time. Don’t waste yours anymore and switch to Clean In Place cleaning!
Simply install the ball and you will no longer need to make any cleaning effort. Designed to ensure complete disinfection without manual cleaning.
This rotating spray ball performs a 360° rotation, activated by water pressure, to cover the entire internal surface of the fermenter or tank.
Although Brewolution developed it for its Conicus Pro fermenters, it is compatible with any fermenter equipped with a 1.5" Tri-Clamp connection.
Installing the CIP cleaning ball
For proper operation of the cleaning ball, we recommend using a 65W magnetic pump. Unlike electric pumps, magnetic models have no contact with any seals. This allows the use of all cleaning products (including the most corrosive). They also have a longer lifespan. A 65W power rating is ideal for the proper functioning of the CIP ball.
You will also need hoses, a bucket, and cleaning/disinfection products.
Warning: for hoses, we recommend PVC or EPDM FlexiRoyal hoses. We advise against silicone models, which tend to pinch and restrict flow.
Finally, you will need to connect the upper Tri-Clamp of the CIP ball to a 1.5" Tri-Clamp of your choice that can be connected to your pump hose.
Warning: for 1.5" Tri-Clamps with hose connectors, we recommend the 19mm size. A smaller dimension will slow down the flow and prevent the ball from rotating properly.
To learn everything about CIP cleaning systems, check out our article: CIP Cleaning: everything you need to know to get started.
Feel free to contact us to set up a system that suits you 100%: [email protected]
Data sheet
- _amaz_country_origin
- Chine
- Part type
- Fermenter accessory
- TC accessory type
- CIP
- System component
- CIP spray ball

