BrewZilla - TC 2” steam condenser kit

This accessory allows brewing indoors without persistent steam damaging your freshly painted walls!

The end cap can be removed to add brewing salts, hops, or other essential ingredients during the boil. Be cautious, as the hot steam exiting through this port can cause severe burns; use heat-resistant gloves.

Not only will you reach a boil faster, but you will also consume less energy to maintain a rolling boil, as less heat will escape.

Simply attach this accessory to the condenser lid and connect it to your kitchen faucet or a garden hose.

A high-speed flow is not necessary to convert boiling steam into liquid. Unlike distillation, where the distillate must remain under a certain temperature to prevent ethanol from evaporating rapidly, boiling wort only requires enough flow to form a liquid!

An eco-friendly option if you have the means to collect and reuse the cooling water. It can later be used for the garden or cleaning. Please note, the discharged water will be very hot!

The spray head can condense 1.6 liters per minute when connected to mains water at 100 psi.

The kit includes:

• 5 x 2-inch Tri-Clamp Clamps

• 5 x 2-inch Tri-Clamp Double Beaded Silicone Seals

• 1 x 2-inch Tri-Clamp T, 340 mm long

• 1 x 2-inch Tri-Clamp T, 200 mm wide

• 1 x 2-inch Tri-Clamp End Cap

• 1 x 6.5 mm Duotight Elbow Fitting for 2-inch Tri-Clamp with Elongated Spray Head

• 1 x 2-inch Tri-Clamp to 12 mm Barb (compatible with silicone hoses with a 10 mm inner diameter)

Not included:

• Garden hose or kitchen hose fittings for 6.5 mm Duotight.