Brewtools steam condenser TC 2" two‑part model

The Brewtools 2" steam condenser is designed to drastically reduce steam produced during boiling. It attaches to the 2" ports of the steam hats on Brewtools B50, B100 and B180 systems. By using cold water, it condenses steam into liquid, eliminating the need for a dedicated ventilation system.

The condenser comes with a nozzle delivering 1.1 L/min at 4 bar. The condensed liquid can be directed into a bucket or directly into a drain, provided the outlet has no back‑pressure in order to maintain internal vacuum.

The manufacturer specifies that several components are required but not included: a TC2" clamp and gasket, a water inlet adapter (TC34 mm to hose or garden connector), a 16x25 mm outlet hose, and a recommended TC34 mm elbow for the water inlet. These items can be found in the recommended products at the bottom of the page.

Why choose this product?

• Eliminates steam during boiling without mechanical ventilation.
• Compatible with Brewtools B50, B100 and B180 steam hats.
• Efficient condensation thanks to the 1.1 L/min nozzle at 4 bar.

Technical specifications

• Compatibility: 2" ports (B50, B100, B180)
• Function: steam condensation using cold water
• Nozzle included: 1.1 L/min at 4 bar
• Liquid outlet: to bucket or drain without back‑pressure
• Included: 2‑part steam condenser + 1.1 L/min nozzle
• Not included: TC2" clamp, TC2" gasket, TC34 water adapter, 16x25 mm hose, TC34 elbow

Rolling Beers Tips

• Reduced power: with the condenser, less power is needed to maintain boiling.
• Beware of boil‑over: too much power greatly increases the risk of overflow.
• No back‑pressure drain: hang the hose above a drain or a non‑immersed bucket.
• Water inlet optimisation: a TC34 elbow helps orient the inlet hose.

Product FAQ

• Does the condenser replace a hood? Yes, it is an effective alternative to ventilation.
• Compatible with B50? Yes, via the 2" port on the steam hat.
• Is the outlet hose included? No, a 16x25 mm hose is required.