CIP‑Reinigungsstation 2 Behälter 200 L 9 kW Edelstahl 304

The 200 L CIP (Clean-In-Place) station is the benchmark equipment for medium-sized breweries looking to streamline their cleaning processes. Built from 304 stainless steel (2 mm thickness), it enables intensive closed‑loop cleaning cycles. Its mobile trolley-mounted structure and sanitary finishes (TIG welds with argon inerting, acid passivation) ensure full compliance with the strictest industrial standards.

Why choose this product?

• Industrial pumping power: The 2.2 kW pump provides a 24 m head, delivering optimal impact pressure for your spray balls, even on 20 hL fermenters.
• Optimized thermal safety: The 9 kW heating element is regulated by a precision probe (± 0.1 °C) with active dry‑run protection.
• Total hygiene: The brushed interior finish with no dead zones and full bottom drainage prevent any stagnation of organic residues or used solutions.
• Simplified operation: Thanks to its dual‑tank system, you can manage alkaline and acid (or rinse) phases simultaneously, drastically reducing downtime on your fermenters.

Technical specifications

• Dimensions: 750 x 2150 x 1600 mm.
• Weight: 268 kg.
• Capacity: Useful 2 x 200 L / Total 2 x 220 L.
• Materials: Stainless steel 304 (2 mm thickness).
• Welding: 100% TIG welded joints with argon inerting.
• Finish: Brushed interior, rinsed and acid‑passivated with no dead zones; polished welds on the exterior.
• Temperature range: Tanks 0°C to 100°C; Pump -10°C to 140°C.
• Design pressure: Atmospheric.
• Pump: Sanitary centrifugal, non self‑priming, horizontal drive.
• Pump electrical power: 1.5 kW.
• Pump capacity: 5 m³/h (18 m head).
• Impeller: Open sanitary impeller with no retention zones.
• Pump connections: Inlet Ø38 / Outlet Ø32.
• Pump surface treatment: Polished welds, sandblasted body.
• Pump sealing: EPDM seals / Max inlet pressure 0.5 MPa.
• Heating: 9 kW electric element with dry‑run protection (soda tank).
• Control: Waterproof control box, thermowell probe (-50/150 °C, ± 0.1 °C accuracy), emergency stop.
• Power supply: 400 VAC – 50 Hz – 3‑phase + Neutral + Earth.
• Frame: Support on 3 feet, stainless steel mobile trolley with 2 swivel wheels.
• Not included: Spray balls, hoses for connection to your brewhouse.

Rolling Beers Tips

• Priming: This high‑power centrifugal pump must never run dry. Always ensure the pump body is fully flooded before each cycle to preserve EPDM seal integrity.
• Thermal efficiency: The 9 kW power allows rapid heating to the target temperature (80°C recommended for caustic). Hot cleaning improves chemical efficiency and reduces cycle time.
• Preventive maintenance: Rinse thoroughly with clean water after each use to remove corrosive acidic residues and maintain stainless steel passivation.

Technical FAQ

Can this station be used on 30 hL tanks?
Although the 2.2 kW pump provides the required 24 m head, the useful volume of 200 L is insufficient to maintain a stable closed‑loop circuit on a 30 hL tank, creating a critical risk of pump cavitation and loss of prime.

What is the pump impeller configuration?
It is an open sanitary impeller. This geometry is specifically designed to eliminate bacterial retention zones and ensure complete cleaning of the pump volute.