Countertop beer dispenser 1-NOZZLE (w/compressor)

1-spout countertop beer dispenser with compressor

The single-spout countertop beer filler is ideal for serving draught beer. Whether you're using a classic keg (with the right filling head), a keykeg or a sodakeg, connecting your beer to the filler will be a breeze with this model. This filler comes with a compensating tap to give you total control over your service. What's more, its built-in air compressor means you don't need CO2!

The beer connection is not supplied. The machine's inlet diameter is 5/8" male. For the best fit, we recommend a John Guest flat-bottom female union fitting. Several versions of this product are available. To make sure you don't get lost: the BSP you choose should always be 5/8". For the tube, this will depend on the size of the pipes in your line (often 5/16" or 3/8"). If you don't have pipes (they're not supplied), then we recommend 2 John Guest pipes (5/16" or 3/8", the choice is yours). We also advise you to mark these pipes (one CO2 and the other Beer) so as not to confuse them.

Please note, however, that the compressed-air outlet to be connected to your pulling head (or sodakeg) is John Guest 3/8". You can therefore either standardize your line to 3/8" and connect the hose directly, or, if you prefer 5/16", use a smooth-tail reducer (5/16" tube to 3/8" smooth tail). For greater ease and comfort, we recommend you standardize on 3/8".   

Technical data:

• Cooling capacity: 152W 543 kJ/h
• Dimensions: 300x190X394
• Weight: 16.5Kg
• Dispensing capacity: 20 liters/hour
• Coils 1x (8/7 x 7m)
• Dry cooling
• Voltage: 220/240 Volt 50 Hz
• Stainless steel