Two-spout countertop beer filler

Cooler over counter 2 ways beer

The two-spout countertop beer filler is ideal for serving two different beers at an event. Whether you're using a classic keg or a sodakeg, connecting your beer to the filler is simple with this model. It can serve up to 60 liters of beer per hour. This filler comes with two compensating taps to give you total control over your service.  It doesn't come with a filling head, so you'll have to get your own to match your kegs.

As fittings are not supplied, the machine's inlet diameter is 5/8" male on both inlet ports. For the best fit, we recommend a John Guest flat-bottom female union fitting. Several versions of this product are available. To avoid getting lost: the BSP selected should always be 5/8". As for the tube, this will depend on the size of the pipes in your line (often 5/16" or 3/8"). If you don't have any pipes, then we advise you to use John Guest pipes (5/16" or 3/8", the choice is yours). We also recommend that you mark these hoses to differentiate between the CO2 and beer lines.

This filler requires a CO2 cylinder connected to your kegs. To optimize installation, we recommend using either a two-outlet pressure gauge, or a John Guest equal-T fitting to connect the CO2 cylinder to the two beer kegs. You'll find downloadable instructions at the end of this description.

Technical data:

• Cooling capacity: 626W 543 kJ/h
• Dimensions: 260x390X420
• Weight : 28Kg
• Dispensing capacity : 60 liters/hour
• Coils 2x (8/7 x 7m)
• Dry cooling
• Voltage : 220/240 Volt 50 Hz
• Stainless steel