MY ACCOUNT
CONTACT
BLOG
A PROJECT ?
During hot‑wort transfers, fermenting‑beer handling, or circulation of cleaning solutions (CIP), the quality of your connectors determines both workflow speed and the overall hygiene of the brewery.
Standard industrial threads (BSPP) contain screw threads that are difficult to clean and prone to retaining organic deposits. This is why the sanitary standard Tri‑Clamp (TC 1.5") has become the norm in the brewing industry.
Whether you want to purchase a pump natively equipped with Tri‑Clamp or convert your existing pumps (Novax, Kegland) using threaded adapters, we support you in the standardization of your transfer network.
Explore our selection of pumps, fittings, and professional Tri‑Clamp adapters.
1. Why convert all your pumps and hoses to Tri‑Clamp?
Adopting a single Tri‑Clamp (ISO/DIN) connection standard across your entire production line provides immediate operational benefits:
- Absolute hygiene and sanitary compliance: Thanks to a flat silicone, EPDM, or PTFE gasket compressed between two stainless‑steel ferrules, the Tri‑Clamp connection offers no dead zones where wort or bacteria could stagnate.
- Tool‑free connection and disconnection: Clamp collars allow you to connect or disconnect a hose, pump, or chiller in seconds with one hand, simplifying daily handling.
- Total modularity in the brewery: By equipping all your hoses, pumps, and tank outlets with TC 1.5", any hose becomes compatible with any piece of equipment. No more time wasted searching for the right adapter in the middle of a brew day!
2. Native Tri‑Clamp pumps vs. Conversion using adapters
Depending on your current equipment and budget, two solutions are available:
- The Native Tri‑Clamp option: High‑end pumps such as the Blichmann RipTide TC integrate stainless‑steel heads with factory Tri‑Clamp outlets. This guarantees perfect sealing, ultra‑fast pump‑body disassembly for cleaning, and an integrated flow‑control valve.
- The Conversion option using Threaded Adapters: If you use compact magnetic pumps (such as the Kegland 25W pump) or standard centrifugal pumps with 3/4" BSP threading (Novax range), you can convert them very easily. A stainless‑steel threaded adapter (e.g., dedicated Kegland adapter or TC 1.5" ferrule with female 3/4" BSP thread) screws directly onto the pump inlet and outlet with Teflon tape or a flat gasket, instantly transforming your pump into Tri‑Clamp equipment.
3. TC hose barbs and connectors: Linking your flexible hoses
To connect your Tri‑Clamp‑equipped pumps/tanks to your flexible transfer hoses (silicone hoses or reinforced food‑grade hoses):
- Tri‑Clamp hose‑barb fittings: Fixed on one side with a Clamp collar to the pump, and inserted on the other side into your flexible hose, secured with a worm‑drive clamp or ear clamp.
- Maintaining cold‑chain and CIP compatibility: 316L stainless‑steel hose barbs withstand chemical disinfectants and boiling temperatures without altering wort quality.
4. Summary table: How to equip your pumps with Tri‑Clamp at Rolling Beers Pro
| Equipment / Target Pump | Original Connection Type | Conversion / Connection Solution | Result Obtained |
|---|---|---|---|
| Blichmann RipTide TC Pump | Native Tri‑Clamp 1.5" | Direct connection via Clamp collar and silicone gasket. | 100% sanitary installation with no threading. |
| Kegland 25W Magnetic Pump | Male MPT 1/2" Thread | Dedicated stainless adapter 25W → TC 1.5". | Cost‑effective conversion of a small pump to TC fittings. |
| Novax / Brass / Stainless Pumps (3/4") | Male 3/4" BSP Thread | TC 1.5" ferrule with female 3/4" BSP thread (+ Teflon). | TC standardization of a classic transfer or CIP pump. |
| Flexible Hoses / Pro Tubing | Bare ends / Smooth hose | TC 1.5" hose‑barb + appropriate clamp. | 100% removable and interchangeable transfer hose. |
Rolling Beers Technical Team Insight
Remember to check the outer diameter of the ferrule! In craft brewing, the most common standard is Tri‑Clamp 1.5" (with a ferrule measuring 50.5 mm outer diameter). Whether your pump outlet is 1/2" or 3/4", adapters convert the outlet to a universal 50.5 mm ferrule. This allows you to use the same gaskets and Clamp collars across your ENTIRE installation. Always keep a spare set of TC 1.5" silicone gaskets on hand to replace worn ones during regular cleaning sessions!