Brewtools B100 brewing system 2×230 V 6 kW

The Brewtools B100 brewing system 2×230 V is a powerful setup designed for advanced brewers and small breweries. It combines high capacity, advanced control technology and remarkable ease of use.

The indirect heating with 10° conical bottom and integrated double cooling jacket provide precise thermal control and easy cleaning. The included whirlpool improves efficiency and speeds up cooling.

The 8" touchscreen can be mounted on the vessel or used remotely. Wort flow is managed by the FCS Brew Pump and controlled via the CleanCore 3‑way sanitary valve. A combined level and temperature sensor automatically shuts off the pump and heating if the level becomes too low.

The malt pipe features a tilting system to make spent‑grain removal easier. The side TC ports allow adding extra inlets or outlets, such as a sparge‑water connection or external cooling.

The B100 comes with its malt pipe, articulated steam hat, laser‑cut filter, CleanCore valve, silicone hoses for drainage and recirculation, and all necessary assembly accessories. A temperature sensor for the malt pipe is also included.

Why choose this product?

• 6 kW power and 117 L capacity for batches from 20 to 100 L.
• Tiltable malt pipe for easier handling.
• FCS technology: pump, sensors and CleanCore valves for precise control.

Technical specifications

• Batch size: 20–100 L
• Total volume: 117 L
• Grain capacity: 26 kg
• Heating power: 6000 W (2×230 V)
• Power density: 4 W/cm²
• Pump: FCS Brew Pump 30 L/min, 4.5 m head
• Materials: 304 stainless steel, food‑grade silicone, EPDM, POK
• Valves: CleanCore 3‑way
• TC ports: TC 1.5" (TC34 mm for the cooling jacket)
• Vessel dimensions: Ø500 mm, height 600 mm
• Malt pipe dimensions: Ø415 mm, height 565 mm
• Total height with steam hat: 950 mm
• Connectivity: Wi‑Fi 2.4 GHz 802.11ax/b/g/n
• Screen: 8" IPS touchscreen
• Safety: overheat protection, liquid detection, anti‑dry boil
• Included: B100 system, tiltable malt pipe, steam hat, laser filter, CleanCore valve, silicone hoses, assembly accessories, malt‑pipe sensor
• Not included: 2 LP20 Schuko cables, glycol jacket connectors, counterflow chiller

Rolling Beers Tips

• Two‑stage cooling: use a counterflow chiller to quickly drop to 40–60 °C before using the double jacket for glycol cooling in under 5 minutes.
• Easy handling: the tiltable malt pipe avoids the need for a hoist when removing spent grains.
• 6 kW power: the 2×230 V version requires two LP20 Schuko cables (not included).
• TC extensions: side ports allow adding an external mash tun or cooling bypass.

Product FAQ

• Are the power cables included? No, the 2×230 V version requires two LP20 Schuko cables.
• Does the B100 have a cooling jacket? Yes, it is integrated, but glycol is not included.
• Is the malt pipe tiltable? Yes, it has a tilting mechanism for draining spent grains.
• Can the B100 be expanded? Yes, via TC ports and external mash tun (see suggested products at the bottom of the page).