TM DESANA MAX CL - Detergent 45g

Desanamax CL Instructions for Use:

We recommend wearing gloves when handling.

Dosage: 1 sachet of 45g for 4.5L of water.

Step 1: Pre-Rinse

Before starting the cleaning process, thoroughly rinse your system: cleaning keg (sodakeg, special keg, or oxebar), lines, taps...

Step 2: Dissolve the Desanamax CL and Take a Sample

Pour the Desanamax CL sachet into your cleaning keg and fill it with 4.5L of lukewarm water (ideally at 35°C). The filling jet should be enough to dissolve the detergent. If necessary, you can double the dose of Desanamax CL and water.

Close the keg and shake it vigorously 3 times. Then, take a small sample of the solution, which should be pink. This will serve as a color indicator to show if the cleaning is complete or needs to be extended.

Step 3: Fill the Line

First, clean and rinse your tap head (or the connectors you use to connect the keg to the tap). Connect your cleaning keg to the CO2 and to the tap, turn it on, and open the taps.

Once the cleaning solution comes out of the tap, close it and let the Desanamax CL act for 20 minutes.

The liquid will be yellow if your line is very dirty or green if it is slightly dirty.

Step 4: Disinfect the Tap Head or Connectors

While the Desanamax CL is acting in the lines, disconnect your CO2, depressurize the cleaning keg, and open it. Immerse your tap head or connectors in the solution and wait 20 minutes.

Step 5: Open the Tap and Check the Color of the Solution

Reconnect the cleaning keg to the tap head and CO2 again. Open the tap to let the solution flow. If it turns green or remains green, close the tap and let it act for 3 more minutes.

Repeat the process until the solution turns purple (like your reference sample).

Once this is done, let the Desanamax CL flow until the keg is empty.

Step 6: Rinsing

Disconnect your cleaning keg and rinse it thoroughly. To check if it is well rinsed, you can do a pH test with a strip. The pH should be equal to that of tap water.

Once the keg is rinsed, fill it and reconnect it to the tap.

Open the tap and let it flow until the keg is empty. For the last centiliters, you can do a pH test to check that the water coming out of your line has a pH equal to that of tap water.

Attention: The date mentioned on the Desana packages corresponds to the production date. The product is valid for up to 2 years after this date.