Icemaster G80 Glycol/Icebank

Icebank/Glycol Chiller G80

Duotight 5/8" BSP to 8 mm fittings are included for the lines, compatible with EVABarrier tubing 4 mm x 8 mm or 5 mm x 8 mm.

With a height of 780 mm, this unit is quite large and won’t fit under most counters, so we recommend planning a custom setup or installing it next to the counter.

It’s important to note that with a single pass, the G60 can only reduce your product temperature by 15°C. Therefore, we strongly recommend pre-chilling your kegs before the event (and keeping them cool if possible), especially if serving in environments above 30°C.

Recommended Setup

The inlet and outlet connections of the G80 are ½ inch BSP male threads.

Our 6mm x 9mm PVC tubing is generally the right diameter for beer lines.

To install a flooded font, you’ll also need high-strength silicone and hose clamps.

Specifications

• Product lines: 8 stainless steel lines
• Product line size: 304 stainless steel coils (5/8" BSP thread, 7 mm ID)
• Cooling output line: 10 mm OD, 8 mm ID

Capacities

• Tank capacity: 90 L water
• Cooling capacity: 780 watts (1 HP) rated at 22°C
• Typical cooling capacity: 90 L in the first hour, 35 L each additional hour
• Compressor power: 450 watts
• Refrigerant: R600A

Dimensions

• Width: 540 mm
• Depth: 690 mm
• Height: 780 mm

Digital Temperature Controller

Simply set your upper and lower limits with the controller.