Stainless steel for drill pump NOVAXDRILL 25mm

This is a classic self priming lateral liquid ring pump with starry impeller. This particular type of hidraulics provides the pump with an extraordinary self priming capacity, also in absence of a continuous flowing of the liquids in suction ( presence of air or other gases ). It is particulary made for the transfer of liquids such as WINE, MUST, SALTY AND SOFT WATER, MILK, OIL, GASOIL, whose viscosity is not over 30 degrees CENTISTOKES or over 4 degrees ENGLER. The fluids to be conveied are to be neutral and clean or contain in suspansion only a small percentage of solids ( 0.2-0.5% max). They are to have a hardnes and granulation which prevent the damage of the inside pump surface. Yet a narrow mesh filter can be mounted on the suction piping.

Instructions for use:

• Attach the pump to a wooden board.
• Mount the discharge hose on the appropriate connection.
• Mount the suction hose with a foot valve with strainer.
• Use the solid spiral hose for suction.
• Fill the pump housing with the liquid to be sucked in.
• Stop the pump immediately if the liquid does not flow in the described modes and times.

Check for possible defects

• Check that the suction pipe is clean and perfectly immersed in the liquid.
• Check that the suction hose is properly connected to the pump's suction connection.

Applications

• For pumping water, wine, milk, oil, must, organic solvents, diesel oil and fertilizers.

Caution

• Do not use concentrated acids, petrol, solvents.