A high foaming, final acid anionic rinse for use in the beverage and food industries.

- Not influenced by organic contaminants
- Requires only 60 sec. contact time!
- Not for use on soft metals or in CIP systems
- Dosage: 15 to 25 ml / 10 liters of water
- Instructions for use in Dutch & French

Directions for use: use as a final rinse. Prior to application; remove gross food particles nd soil by pre-flush or pre-scrape and, when necessary, pre-soak. Then thoroughly wash or flush objects with a good detergent, followed by potable water. Prepare a solution of 15 - 25 ml Star San HB™ per 10 L of water ( 1 oz/5 gal to 1 oz/3 gal). Apply on surface with a cloth, mop, sponge, spray or by immersion. Spray 15-20 cm (6-8 inches) from surface and rub with a brush, cloth or sponge (cover or remove all food products). The surface must remain wet for at least 1 minute. Let air dry afterwards. Close the packaging tightly after use and store in a well-ventilated place.
Keep out of reach of children.

Above all, do not mix Star San HB™ with chlorinated cleaners, which will generate chlorine gas.